AG SURGE ARRESTER FOR RJ45 POE ETHERNET LINES
10 December 2019
TERMINAL TYPE AG SURGE ARRESTER PRODUCTS
26 December 2019
Surges reaching your panel are now under control!
Our Raycap low voltage surge arrester products detect and suppress lightning and grid surges reaching your system within a time as short as 25 ns. While your facility continues to operate safely with our Raycap surge arrester products installed in your panels; however, you may not be aware of the presence of harmonics and sudden voltage peaks, which can be a major issue; you will not be able to track incoming lightning strikes. At this exact point, with our ProSEC II New version 4.0 lightning counter integrated with our AG Surge Arrester products, all surges reaching your system are under control!
With this counter featuring date and time display and 2 years of unlimited battery life, you can monitor all surges reaching your facility. Additionally, you can also check the operating performance of the surge arrester system. The LED-display ProSEC-II will easily adapt to your system with its easy installation guide.
Raycap ProSEC-II, which has a special surge reader sensor, should be mounted on the rail at a distance of 10 cm from the surge arrester; and the sensor should be connected to the grounding line.
In order to keep your system under continuous control; to present evidence to your insurance company in case of possible problems; and most importantly to see how successfully your system is protected, we recommend the ProSEC II Series AG Surge Arrester counter system.
You can access detailed information about the product by downloading the datasheet. CLICK TO DOWNLOAD…
Keep following Yılkomer for solutions that make a difference and add value in lightning protection!
