Let’s Get to Know Sertec CMCE Technology..
The main material of the CMCE technology-based prevention system is Graphene.
Graphene is a two-dimensional nanometric material consisting of a single layer of carbon atoms. It exhibits SP2 hybridization. Its atomic hexagonal structure resembles a honeycomb. Graphene is one of the allotropic forms of carbon, like graphite and diamond. Thus, one millimeter of graphite contains three million graphene layers.
It is the strongest material known in nature, stronger than structural steel of the same thickness and harder than diamond, while its thickness ranges between 1 and 10 carbon atoms. Due to its extreme thinness, it can only be seen as two-dimensional and is considered a two-dimensional material—the only material capable of this.
CMCE technology creates a specific angular protection shield. It ensures that the electromagnetic field within the incidence area is reduced to tolerable levels. Thanks to its capacitors, it provides electromagnetic balancing.
It can discharge surges in 10/350 µs (35 MHz) waveforms, which are considered very high-frequency impulses.
This design is engineered to protect the structure from airborne electromagnetic impulses. Full protection is provided against induced currents from both lateral sides and the top. For CMCE technology to function properly, grounding and all metallic parts of the structure must be equipotential. In an equipotential system, CMCE technology reduces electromagnetic field effects by 90% to 95%. For CMCE technology to operate effectively, the common grounding resistance value of the regulated equipotential system must be less than 5 ohms.
The lateral CMCE must be inclined by 5° relative to the vertical. The reason is that lateral electromagnetic impulses are better absorbed with a slight tilt of the CMCE due to its geometry. Radiated electromagnetic fields arrive laterally, and this angle allows the CMCE to absorb impulses more effectively. In vertically installed systems where overhead lines pass above the structure, CMCE can be installed vertically and, depending on the model, provides protection within a radius of 25, 55, or 120 meters.
By using the CMCE Lightning Prevention System against electromagnetic field waves in your facility, it is possible to prevent potential health and electrical problems. Before implementation, Yılkomer’s expert engineering team conducts the necessary magnetic measurements on-site and then provides the most accurate design and solution for your facility.
Remember, Yılkomer Protects Your Values!
