LED SURGE ARRESTER

In parallel with the rapid transition of lighting systems to LED systems in our country; due to the extreme sensitivity of these systems, the percentage of damage against sudden voltage increases is also increasing.

Especially in outdoor lighting, impulses coming through the ground; in charged weather conditions, the desire of clouds to draw ions through lighting poles causes serious damage to LED systems. In order to prevent these problems, LED surge arrester products should be used. Low voltage surge arrester systems produced for the protection of LED systems should protect systems and investments against possible major damages by especially preventing driver burnout.

The Raycap MPE Mini Led Series LED system surge arrester, produced in accordance with the Tedaş specification, is manufactured within the scope of the IEC 61643-11 Standard. We recommend that LED surge arrester systems, which can provide protection in TİP 2 and TİP 3 categories, be used together with main surge arresters with Type 1+2 Lightning protection features at direct energy inputs or energy distribution panels in order to prevent damage against strong future lightning impulses. Thus, the entire system will be protected against both sudden voltage increases and possible strong lightning.

Internal lightning protection systems, whose use is made mandatory in Article 43 of the Internal Installation Regulation, enable the sustainable operation of systems while ensuring the long service life of our investments.

You can contact Yılkomer engineers for product selection and detailed information.

Sending an email to info@yilkomer.com
is sufficient.